ADI AR-147 User Manual page 34

1. To call all station in the group, select the memory number in which the
group code is stored. In this example, the number is stored in number
P3.
2. Press the PTT key once or press a key other than DTMF to display
the frequency again.
3. Press the PTT switch.
Group code 789 and your station ID code 111 are transmitted. A DTMF
tone sounds is heard during transmitting.
Calling a specific station (Example:Call station 3.)
To call a specific station (for example, station 3), use the following
procedure:
1. Select the memory in which the local station code is stored (in this
example, select memory p2.) or Enter the individual code of the local
station in memory 0.
2. Press a key other than DTMF key to display the frequency again.
3. Press the PTT switch.
Local station code 444 and your station ID code 111 are transmitted. A
DTMF tone sounds is heard during transmitting.
5-10-4 Paging Reception (Stand by)
1. Turn to the predetermined frequency.
2. Press the DTMF key to light the PAG indicator.
Stand by with individual code (Example: Stand by for station 3.)
33