Included In Delivery; Connection To Pc, Laptop Or Touch Book - Simons Voss Technologies Smart CD.MP Manual

persons, physical damage or any other losses.
· This documentation has been compiled in accordance with the best
knowledge available to us. However, errors cannot be ruled out. No liabili-
ty is accepted in such cases.
· As a precaution, people who have implants should consult their doctor
regarding any possible hazards caused by radio component assemblies
(13.56 MHz).
· Should there be differences in the content of other language versions of
this documentation, the German version applies in cases of doubt.
3.0

inCluded in delivery

1. Smart CD.MP
2. USB cable for connection to a USB port.
3. CD ROM with USB drivers
4. Instruction leaflet
4.0

ConneCtion to PC, laPtoP or touCH booK

Smart CD .MP can be directly connected to a free USB port (USB 1.1, USB
2.0 or USB 3.0) on a PC or laptop, or on a netbook or Touch Book in the
case of mobile programming, using the supplied cable. If Smart CD .MP is
connected to a USB hub, the hub must have its own power supply.
Smart CD .MP can be used to programme all SC (.MP) digital components
in the SimonsVoss System 3060 directly on a PC or laptop.
12