Get Started - KitchenAid KCM1208 Get Started

In a few easy steps, you'll be on your way to enjoying something delicious!
For complete instructions and videos, go online to KitchenAid.com/Quickstart.
Refer to your User Care Guide for detailed information on additional features, such as
NOTE:
Auto Set (for pre-programmed brewing) and changing the brew strength (regular or bold).
1.
Pour with Carafe: Use Carafe to pour
enough fresh, cool water.
Pour directly with removable Water Tank:
Gently lift handle of the Water Tank to
remove and pour enough fresh, cool water.
Use the level markings on the Water Tank
to make the desired amount of coffee.
Close the Water Tank Lid.
3.
If using a Gold Tone permanent filter:
Use the "Dosage Ladder" provided inside
the Gold Tone permanent filter to add
enough amount of ground coffee.
If using a cone paper coffee filter:
Use the "Dosage guide" provided on the
Water Tank to add enough amount of
ground coffee into the brew basket.
5.
To begin Brewing Coffee, press the BREW
button provided on side or on the front.
The Coffee Maker will beep 1 time, and the
"Brew" icon will light up.

GET STARTED

QUICK START GUIDE
2.
Raise the brew basket lid. As desired,
insert the Gold Tone permanent filter or
cone paper filter into the brew basket.
Place the carafe securely in the Coffee
Maker.
Do not use both types of filters at the
NOTE:
same time. Doing so might cause water and
coffee to overflow the brew basket.
4.
Shake the brew basket slightly to even out
the bed of coffee ground.
Close the Brew Basket Lid. Be sure the
brew basket lid is fully closed before
brewing.
6.
When Brew cycle is complete, the Coffee
Maker will beep 3 times, then it will
automatically initiate the 2-hour Warm
mode. Pour your coffee and enjoy!
OR
AM
PM
Auto
x