Basic Operations; Camera Operation - PNI HUNTING 2C Manual

BASIC OPERATIONS

1. Open the cover on the back of the camera and insert the micro SD card and the batteries
Power on the camera
2. Press and hold Power/Navigation button
working mode after indicator flashes 5 times
3. Press once the Menu/OK button
Manual Photographing/ Video Recording
Test Mode main Interface - press again Power/Navigation button
4.
videos, or photo+video based on camera settings; stop video recording by pressing again
Power/Navigation button
Enter Menu for setup functions
5. Test Mode main Interface - press the Menu/OK button
now the button
made
6. Press and hold the button
Mode (Camera Modes Menu) after you have made all the settings
7. Test Mode main Interface - Press and hold the button
PIR mode; (the led indicator will blink 3 times, the screen will fe off)
Power off the camera
8. Press and hold the button for 5 seconds

CAMERA OPERATION

Camera ON/OFF
(PIR Auto, Test, OFF)
User manual
to wake up camera LCD screen to enter Test Mode
it is for navigation only; the button
for 3 seconds, to return to the main interface of the Test
PIR Auto Mode
Test Mode
Power off
for 3 seconds; camera will enter PIR Auto
to enter the settings menu;
it is just to confirm the settings
for 3 seconds, to enter Auto
to turn off the camera.
Hold pressed Power button
for 3 seconds; the camera
will enter PIR Auto mode after
the led indicator blinks 5 times
PIR Auto mode, press once
the button Menu/OK
wake up the camera's screen
and enter Test mode
Hold pressed Power button
for 3 seconds in order to
turn off the camera
to shoot photos,
to
4