8
Take the battery-printed circuit board unit
in your hand with the printed circuit
pointing towards you.
C
9
Insert a screwdriver at right angles
between the printed circuit board and the
batteries.
10
Break the printed circuit board in two,
using the screwdriver as a lever.
C
11
Pry the batteries apart with the
screwdriver and remove the plastic
battery holder.
12
Separate the batteries from the broken
printed circuit board by twisting them.
C
13
Lift the motor out of the other plastic part
with a screwdriver.
Do not try to reassemble the appliance in order
to run it from the mains. It would be dangerous
to do so.
ENGLISH
17