Table of Contents
Advertisement
CE ORIGINAL MANUAL
LACROS SCAMPER S200/S400
VERSION CE 1.2 EN
Switch between the 9 levels of motor support
The electrical motor support has 9 levels. The active setting is
displayed on the top left of the display. You can increase or
decrease the support by using the (+) and (-) buttons.
Additional options of the display
By pressing the (S) button briefly in succession, you can scroll
through various data:
Total Km / Miles reading (ODO) (Y), Trip reading (TRIP) (K),
cycle time (TIME) (L) and maximum speed (MAX) (M).
Reset Trip, Time and Maximum speed data by pressing
the (S) and the (-) buttons together for 2 seconds.
USB-port SAMA display
Below the display you will find a USB port (A) where for
example your phone or navigation device can be charged
while cycling. This charging only works when the display
is turned on.
De Shifter
The shift mechanism of the derailleur is located on the steering
wheel, which has a (B) and (C) thumb control. By using (B) you
switch up, by pushing (C) you switch down.
Note: You must keep pedaling while switching gears. However,
it is better for the gears that you do not put excessive force on
the pedals during the shift.
Adjusting the front fork suspension
On top of the front fork suspension on the right side is a cap on which
you can turn to adjust the strength of the front fork suspension.
Indicated with a plus and a minus for less and more suspension.
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Lacros SCAMPER S200 and is the answer not in the manual?
Questions and answers