Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro-X XW-HDU03
Summary of Contents for Pro-X XW-HDU03
- Page 1 XW-HDU03...
-
Page 2: Safety Precautions
■After long time of continuous use, the outer case of the unit may be warm to touch. ■In case of damage, smoke, unusual smell or other unexpected situations, stop using the unit immediately and consult your local distributor or PRO-X. ■The HDMI interface does not support hot plug. - Page 3 HDU03RX (receiver) is between 3 meters and 200 meters LOS (line of sight). Introduction The XW-HDU03 system is designed for wirelessly transmitting uncompressed 1080P HD SDI/SDI video and audio from any camera to field monitors. XW-HDU03TX is the transmitter, and connects to a camera.
- Page 4 XW-HDU03 TX V Type Mount V Type Mount NET LED HDMI IN VIDEO LED SDI OUT Frequency Points Selector Dial SDI IN POWER LED DC IN Power Swtich Right Side Left Side XW-HDU03R TX NET LED HDMI IN VIDEO LED...
-
Page 5: Video Led
XW-HDU03 RX V Type Mount NET LED HDMI OUT VIDEO LED SDI OUT Frequency Points SDI OUT Selector Dial POWER LED DC IN Power Swtich Right Side Left Side... -
Page 6: Specifications
Specifications Model XW-HDU03 Video Resolution 1080P, 1080i, 720P, 576i, 480i Up to 3.072Mbps AC-3 and DTS Audio Format Digital Audio Time Code LTC; VITC Transmission Distance 200m LOS (line of sight) Latency Less than 1 millisecond Frequency 5.1GHz~5.9GHz Interfaces Audio/Video... - Page 7 Connect DC IN on TX and a battery with P-Tap with DC IN cable, and turn the power switch on. Digital HD Monitor Cine Camera Cine Camera HDMI Cable SDI Cable DC IN Cable XW-HDU03 TX V Type Mount Battery DV Battery V Type Mount Battery XW-HDU03 TX Video Camera...
- Page 8 Connect switcher’s SDI input to SDI OUT of RXwith SDI cable. Connect DC IN on RX and AC power source with the adaptor, or you can mount a PRO-X battey on RX and turn the power switch on. Digital HD Monitor...
- Page 9 2. Power On When TX and RX all connected with power source, turn the power switch on and Power LED stays on. DC IN POWER LED When the input signal is identified, VIDEO LED on TX stays on, NET LED on TX stays on.
- Page 10 ◆When an external power supply is used, power failure can be avoided by mounting a PRO-X V type mount battery lithium ion battery to the set at the same time. If the external power supply fails, operation continues via battery power.
-
Page 11: Troubleshooting
Troubleshooting Fault Solutions ● Check the battery mounted is available. Power LED doesn’t light up ● Check the power plugs of TX and RX are properly inserted into a functioning power outlet. ● Make sure the power sources connected to TX and RX are No video is displayed on functional the monitor... -
Page 12: Standard Packing
Standard Packing Please check whether the following items are present in the package. If any items missed or damaged, please contact your dealer. Description Quantity XW-HDU03 TX XW-HDU03 RX PT-LEMO DC IN Cable SDI Cable Magic Arm (7 Inch) Lamp Holder User’s Manual...