Advertisement
1.
Oscillating knob
2.
On / Off / Speed Control
3.
Tilt range knob
4.
Tilt adjustment bolt
5.
Post top
6.
Post
7.
Base washer
8.
Base thumb screw
9.
Fan head assembly
10.
Tilt range screw
11.
Tilt adjustment knob
12.
Base
1.
Your fan has been boxed unassembled to
minimise packaging waste. Each part is
designed
to
disassembled easily for cleaning and
storage.
2.
Start with the base and post as follows.
3.
Remove the tilt adjustment knob by
unscrewing the knob and slide the tilt
adjustment bolt out. Remove the base
thumb screw and the base washer by
unscrewing as shown.
Components
Assembly
fit
together
and
4.
Fit the post into the recess in the top of
the base and whilst holding it in place,
be
turn over to access underneath. Place the
washer over the hole and then insert the
base thumb screw. Tighten securely, then
turn the assembly the right way up and sit
on a flat surface.
Advertisement
