Page 2
General Care and Safety Guide Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
Page 3
Have the appliance checked and repaired by a qualified electrician if repair is necessary. 33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards. TECHNICAL SPECIFICATION Model: GCDF225W / GCDF225B Supply: 220 - 240VAC 50/60Hz Wattage:...
Page 4
Components Oscillating knob On / Off / Speed Control Tilt range knob Tilt adjustment bolt Post top Post Base washer Base thumb screw Fan head assembly Tilt range screw Tilt adjustment knob Base Assembly Your fan has been boxed unassembled to Fit the post into the recess in the top of minimise packaging waste.
Page 5
Assembly (cont.) Using a Philips screwdriver, remove the Slide the tilt adjustment bolt all the way small tilt range screw from the coupling through as shown. bracket on the fan neck and then unscrew the tilt range knob. Screw in the tilt range knob to loosely secure.
Operating your Fan Always choose a safe location for the Fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
Page 7
PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm...
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.