Listening To A Disc - Teac MC-DV600 Owner's Manual

Press the FUNCTION button to select "DISC Source".
When no disc is loaded in the disc tray, "NO DISC" is displayed.
Press the OPEN/CLOSE ( ) button to open the tray.
Insert the disc label side up.
In the case of double-sided discs, the side to be played should
be face down.
Make sure the disc is centered in the tray in order to avoid any
malfunction or jamming of the tray or damage to the disc.
22
J

Listening to a Disc

Press the OPEN/CLOSE ( ) button again to close the tray.
The tray will close. Take care that you do not catch your fingers
in the tray.
It takes a few seconds for the unit to load the disc. After the unit
load the disc, the disc type (CD, DVD etc.) is shown on the TV
screen.
Some discs may automatically start playback.
Press the Play/Pause ( / ) button to start playback if
playback has not started automatically.
If a menu is shown on the screen (some DVD or video discs
may show such a menu), see "On-screen menu" on the next
page.