Turning On The Power; Starting Up For The First Time - Toshiba A200 Series User Manual

2. Lift the panel up and adjust it to the best viewing angle for you.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.

Turning on the power

This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section
time
1. If a USB floppy disk drive is connected, make sure the drive is empty - if a
disk is in the drive, press the eject button to remove it.
2. Open the display panel.
3. Press the computer's power button and then release it.

Starting up for the first time

When you first turn on the power, the computer's initial screen is the
Windows Vista™ Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.
Be sure to read the Windows Operating System End User License
Agreement carefully.
User's Manual
in this chapter.
Turning on the power
Getting Started
Starting up for the first
3-3