Timer - Teac SR-LX5i Owner's Manual

ALARM 1, ALARM 2
< The unit can be programmed to turn on
at a specified time. The unit will Standby
after 120 minutes of reaching the
specified time.
< The unit can be set two different timer
setting separately.
< Adjust the clock before setting the timer
(see page 11).
Setting the timer
1
Press and hold the ALARM 1 or
ALARM 2 button for more than 2
seconds.
The clock and the Timer indicator (
) blinks on the display.
< If no button is pressed for about 8
seconds, the timer setting mode will be
canceled.
20

Timer

2
.//
3
4
< To use buzzer, select "
5
or
Press the Skip buttons (. or /)
to set the hour, and then press the
ALARM 1 or ALARM 2 button.
Press the Skip buttons (. or /)
to set the minute, and then press the
ALARM 1 or ALARM 2 button.
Select a source using the Skip
buttons (.//), and then press
the ALARM 1 or ALARM 2 button.
Set the volume using the Skip
buttons (.//), and then press
the ALARM 1 or ALARM 2 button.
The volume for timer operation is
adjustable from 5 to 40.
Setting the timer is now completed.
".