Summary of Contents for SMP Playgrounds HOGS BACK EC205S
Page 1
INSTALLATION INSTRUCTIONS HOGS BACK EC205S & EC205B NO PART OF THIS MANUAL OR DOCUMENT MAY BE COPIED OR RE-PRODUCED IN ANY FORM OR BY ANY MEANS WITH OUT THE EXPRESS WRITTEN PERMISSION OF SMP (PLAYGROUNDS) LTD. - W: smp.co.uk - T: +44(0)845 260 1655 E: sales@smp.co.uk...
Page 2
HOGS BACK EC205 Page 2 ISSUE D 02-04-2012...
Page 3
HOGS BACK EC205 Section 1: x 2= T EC205S 348.00 0.80 3.6 x 2.2 x 2.8 4.00 X 3.00 2.20m T = 4h EC205B 350.00 0.85 TYPE 1/2/3 101/144 6360 2.2 m 3175 2000R 2000R 1500R 1500R 1500R 1500R ISSUE D 02-04-2012 Section 1 Page 3...
Page 4
HOGS BACK EC205 EC205B TYPE 1/2 101/144 2.2 m LTB23 LTB49 1485 1890 450 x 450 450 x 450 500 x 500 Section 1 Page 4 ISSUE D 02-04-2012...
Page 5
HOGS BACK EC205 EC205S TYPE 3 101/144 LTB23 2.2 m LTB49 1485 1690 450 x 450 450 x 450 500 x 500 ISSUE D 02-04-2012 Section 1 Page 5...
Page 6
HOGS BACK EC205 ITEM EC205S EC205B 69.3 3850 LTB23 X 2 37.8 2150 LTB48 X 1 20.25 1125 781-000 LTB49 X 2 18.6 1200 LTB50 X 1 X 11 LTB51 X 11 12.6 2100 LTB52 X 2 780-564 39.5 780-517 3.00 2270 CRS RTB17...
Suitable working platform to provide secure access and provide support for parts required. SPECIFICATIONS SMP Playgrounds Ltd recommends an effective Impact Absorbing Surface tested to EN1177 & BS7188 beneath this play equipment. Refer to manufacturers instructions for details of installation. The surface should have a Critical Fall Height greater than the Maximum Free Fall Height of the equipment.
Page 22
HOGS BACK EC205 ESTABLISH ORIENTATION Measure out the site to ensure the space required fits into the allotted area, it is horizontal and free from trip points or other obstructions. vii) Ensure the equipment is to be provided with an effective Impact Absorbing Surface which has a tested critical fall height rating greater than the maximum Free Fall Height of the equipment.
Page 23
HOGS BACK EC205 vii) Assemble Ramp Cross Log (Item 1 - LTB50) to the 2 Ramp Upright Posts (item 1 - LTB49) using 2 off M16 X 240 Stud (item 11) and 4 off M16 Washers (item 16) and M16 Nyloc Nuts (item 17). Ensure Ramp Cross Log (Item 1 - LTB50) is fitted to correct side of Upright Posts (item 1 - LTB49).
HOGS BACK EC205 POST INSTALLATION INSPECTION CHECK CHECK The unit is installed at the correct height. All fixings are tightened and have no protruding sharp edges. All wooden parts should have no sharp edges or cracks. Ensure all plastic plugs are correctly fitted. Ensure Manufacturers Label is fitted.
Need help?
Do you have a question about the HOGS BACK EC205S and is the answer not in the manual?
Questions and answers