Table of Contents
Advertisement
The Program Mode menu reappears:
PROGRAM MODE MENU:
(1) ADD a new password and its associated parameters
(2) DELETE an old password and its associated parameters
(3) LIST & EDIT one existing password and its associated parameters
(4) LIST ALL passwords
(5) DISPLAY/SET the clock
(6) CLEAR password table
(7) EXIT from program mode
Please enter your selection (1-7):
Choose Option (5) by typing 5 and pressing
<Enter>.
The following prompt appears:
CURRENT TIME IS:
ENTER NEW TIME:
Type the new time, in the format HH:MM:SS, where
H=hours, M=minutes, and S=seconds.
The program menu appears again. Select Option
(6), CLEAR password table, by typing 6 and
pressing <Enter>. The program menu reappears.
Exit from Program Mode by typing 7 and pressing
<Enter>.
00:05:05
CHAPTER 4: Operation
21
Advertisement
Table of Contents
