Table of Contents
Advertisement
Type 1, 2, or 3 and press <Enter>. The screen
prompts:
1. USER PASSWORD
2. PROGRAMMING MODE PASSWORD
ENTER NUMBER 1-2 FOLLOWED BY CR:
Type 1 or 2 and press <Enter>. The Program Mode
menu reappears.
PROGRAM MODE MENU:
(1) ADD a new password and its associated parameters
(2) DELETE an old password and its associated parameters
(3) LIST & EDIT one existing password and its associated parameters
(4) LIST ALL passwords
(5) DISPLAY/SET the clock
(6) CLEAR password table
(7) EXIT from program mode
Please enter your selection (1-7):
Type 2 and press <Enter>. The software prompts:
ENTER PASSWORD NUMBER 01-64 FOLLOWED BY CR:
Enter the 2-digit location number of the password
you wish to delete. For example, 01 would delete
the first password programmed in Location 01.
Choose programming only if this user should be
calling in and changing the configuration of the
PSG. If not, you must use the DIP switch to set the
initial password.
CHAPTER 4: Operation
19
Advertisement
Table of Contents
