Power Connection; Amplifier Connection - Madison MAD-LPRETRO User Manual

POWER CONNECTION

Connect the supplied DC power adapter to the DC socket (13) on the rear panel and the other end into an
appropriate mains outlet.

AMPLIFIER CONNECTION

Connect audio plugs to the input on your mixer or amplifier:
Red plug into right channel input.

White plug into left channel input.

Playing a record
1. Open the latches on the side of the unit and lift up the id. Make sure that the arm support is secured.
2. Remove the protective cover from the stylus cartridge.
3. Place the record of your choice on the turntable. If it is a 45rpm, do not forget to place the adaptor on
the record spindle.
4. Choose the desired playing speed using the Speed select switch between 33.3, 45 and 78rpm.
5. Turn on the rotary power switch of the turntable. Please note that this button also controls the volume.
6. Release the tone arm lock.
7. Raise the arm using the cue lever and place the stylus vertically over the first track of the record. The
turntable will start turning automatically.
8. Use the cue lever to slowly place the stylus down onto the record's groove.
9. When the record comes to the end, the turntable will stop automatically if the auto-stop switch is on
the ON position. If it is in the OFF position, the turntable will continue to spin.
Note: If your record stops before the last track finishes, set the AUTO STOP switch to OFF. Your record
will now play to the end, but you will have to stop the turntable rotation manually.
Auto Stop
• When a record finishes playing, it can be controlled by the auto-stop ON/OFF switch.
• Lift up the tone arm and put it on the rest when finished.
• Replace the protective cap on the stylus and close the tone arm lock.
• Turn off the power at the mains.
Bluetooth Function
Set the input selector on BT/PHONO position.
Lift up the tone arm and put it on the rest. Then the BT function is ready for pairing.
Open your Bluetooth equipment and select MAD-LPRETRO in the list of found device.
In this mode, the turntable mode will stop automatically.
Radio Function
Set the input selector on AM or FM position.
Rotate the tuning dial on the desired radio station.
©Copyright LOTRONIC 2017 MAD-LPRETRO 3