Craftsman 37634 Owner's Manual page 8

UNPACKING AND CHECKING
CONTENTS (Figure 4 and Figure 5)
This Dust Collector will require a minimal amount of
assembly.
Remove all of the parts from the shipping box and lay
them on a clean work surface. Compare the items to
Figure 4 and Figure 5, verify that all items are account-
ed for before discarding the shipping box.
Fig. 4
V!ykvlv/_4 ;i _11_ [_
If any parts are missing, do not attempt to plug in the
power cord and turn "ON" the Dust Collector. The Dust
Collector can only be turned "ON" after all the parts
have been obtained and installed correctly.
A
D
\
E
o
B
!
J
A. Blower and Motor Assembly
B. 4-inch Hose Clamp (2)
C. 4-inch Diameter Flexible Hose
D. Intake Port
E. Base
E Intake Port Caps (2)