2
System Setting
14
System Setting
Auto Set Up
You can reset the recorder to all its factory settings.
The [Auto Set up] menu appears on the screen after
the factory settings.
Step 1. Language Selection
Use w/s/a/d to select a language for the on-
screen display, and press ENTER (b).
2
Step 2. Screen Size Setting
Use a/d to select a screen size, and press ENTER
(b).
Step 3. Country Selection
Use w/s/a/d to select a country, and press
ENTER (b).
Step 4. Password Setting
Input the new password using numerical buttons.
Enter it again to verify.
Step 5. Auto Tuning
1. While the Start option is selected, and press
ENTER (b) to begin the channel search.
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Auto Tuning] function
will be skipped.
2. Press ENTER (b).
Step 6. Setting is complete
Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Complete] is highlighted to
finish the auto set up settings.