Change Protection Code - Sagem ITD 5510 User Manual

All manuals and user guides at all-guides.com

4-8 CHANGE PROTECTION CODE

BYTE AV INSTALLATIONSKOD
- - - -
NY KOD
BEKRÄFTA
ÄNDRA BEKRÄFTA TILLBAKA
OK
BYTE AV INSTALLATIONSKOD
NY KOD - - - -
- - - -
BEKRÄFTA
ÄNDRA TILLBAKA
OK BEKRÄFTA
BYTE AV INSTALLATIONSKOD
NY KOD - - - -
- - - -
BEKRÄFTA
FELAKTIG
BEKRÄFTELSE
BÖRJA OM
ÄNDRA TILLBAKA
OK BEKRÄFTA
BYTE AV INSTALLATIONSKOD
NY KOD - - - -
- - - -
BEKRÄFTA
GODKÄND
BEKRÄFTELSE
ÄNDRA BEKRÄFTA TILLBAKA
OK
Ch04.p65
BLEU PANTONE 293C
SET TOP BOX INSTALLATION .4
Enter your new code.
The first segment blinks until its value is entered, then the
second segment blinks, etc.
As soon as the value has been entered, the segment is
replaced with a star.
Use the arrow key on the remote control unit to come back
to a value that has been entered and modify it until the whole
OK
is confirmed by
AVSLUTA
X
In this case, the value becomes a blinking segment again,
indicating that entry is possible.
Enter the same new code to confirm it.
X AVSLUTA
If you have not entered the right code, you will see an error
message.
X AVSLUTA
Indication of correct acknowledgement.
AVSLUTA
X
19
.
10/12/02, 09:52
19