Aeropro AP7460 Operating Instructions Manual

Air impact wrench 3/4” square drive - twin hammer

Advertisement

Air Impact Wrench
3/4" Square Drive - Twin Hammer
• Twin hammer mechanism has 2 identical hammers that deliver an
instantaneous balanced blow, reducing vibration and transferring
more torque to the drive than any other mechanism on the market.
• Provides more power and smooth balanced blows.
• Screened filter air inlet keeps dirt and
debris from damaging the tool.
• Rear exhaust.
• Recommended air pressure 90 psi.
Capacity
Bolt Size
Part
Square
Number
Drive
Imp
(")
AP7460
3/4"
1"
Free
Working
Speed
Torque
Met
RPM
Ft/Lb N.m.
(mm)
25
7,250
1200
Overall
Length
Imp
Met
(")
(mm)
1627
8.2
208
Air
Air
Average Air
Inlet
Hose
Consumption
ID
cfm
l/min
3/8"
1/2"
9.5
Net
Weight
lbs
Kg
269
7.0
3.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP7460 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Aeropro AP7460

  • Page 1 • Recommended air pressure 90 psi. Capacity Free Working Overall Average Air Bolt Size Speed Torque Length Inlet Hose Consumption Weight Part Square Number Drive Ft/Lb N.m. l/min (“) (mm) (“) (mm) AP7460 3/4” 1” 7,250 1200 1627 3/8” 1/2”...
  • Page 2: Air Supply

    Operating Instructions Description Die cast aluminium body. Reversible. Rubber scuff guards. Built-in air regulator varies speed and power. Front exhaust. Designed for removing and installing nuts and bolts. Ideal for tyre changing, general assembly works and other workshop applications. Air Supply 1.
  • Page 3: Loading And Operation

    Operating Instructions In the event that it becomes necessary to store the tool for an extended period of time (overnight, weekend, etc.) lubricate the tool generously. The tool should be run for approximately 30 seconds to ensure that the oil has been evenly distributed throughout the tool. The tool should be stored in a clean and dry environment.
  • Page 4 Operating Instructions Trouble Shooting The following table details the common operating system with problem and solutions. Please read the table carefully and follow it. WARNING: If any of the following symptoms appear during your operating, stop using the tool immediately, or serious personal injury could result. Only qualified persons or an authorised service centre can perform repairs or replacement of tool.
  • Page 5: Residual Risks

    Safety Rules and Hazards Residual Risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design: 1. Damage to lungs if an effective dust mask is not worn. 2.
  • Page 6: General Safety Rules

    Safety Rules and Hazards General Safety Rules 1. For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining, changing accessories on, or working near the power tool. Failure to do so can result in serious bodily injury. 2.
  • Page 7: Operating Hazards

    Safety Rules and Hazards Operating Hazards 1. The use of the tool can expose the operators hands to hazards including crushing, impacts, cuts, abrasions and heat. Wear suitable gloves to protect hands. 2. Operators and maintenance personnel shall be physically able to handle the bulk, weight and power of the tool.
  • Page 8: Dust And Fume Hazards

    Safety Rules and Hazards Dust and Fume Hazards 1. Dust and fumes generated when using power tools can cause ill health (for example, cancer, birth defects, asthma or dermatitis); risk assessment and implementation of appropriate controls for these hazards is essential. 2.
  • Page 9: Vibration Hazards

    Safety Rules and Hazards Vibration Hazards 1. Exposure to vibration can cause disabling damage to the nerves and blood supply of the hands and arms. 2. Keep the hands away from the nutrunner sockets. 3. Wear warm clothing when working in cold conditions and keep your hands warm and dry. 4.

Table of Contents