Using The Voice Recorder; Battery Switch; Set Date And Time - Oregon Scientific VR636 Instruction Manual

All manuals and user guides at all-guides.com
SWE NL
• PC-Link cable (USB 1.1)
• Strap
• User Manual
• Quick Start Guide
2. Install the VR-Link Software
( - >14).
3. Charge the Batteries:
• Slide the Battery Switch to the on
position. (It must be on to charge
the batteries.)
• Attach the supplied USB cable
to the computer's USB port and
the recorder's digital terminal.
• PC must be switched on before
charging will start.
• The battery status indicator
will blink when the battery is
fully charged.
Note: Refer to page ( - >13) for more
information about the battery.
4. Press to exit STANDBY MODE.
5. Press MENU to change modes
Set time and date ( - >5).
6.
POR ES IT
Turn the unit on by sliding the Battery
switch to the on position. Power must be
on for all recording, playback, and setting
features to work.
Note: The voice recorder will
automatically switch to STANDBY MODE
if you do not press any keys for three
minutes.
Set the Date and Time
1. Press
STOP mode.
STANDBY
MODE
2.
3.
DE FR

Using The Voice Recorder

to exit STANDBY and enter
PRESS
STOP
Press
MENU
until SET-
TING
MODE is
displayed.
Setting the Date and Time:
Press to start changing values.
Shifting the jog dial UP (
( ) changes values and pressing
sets them.
EN
STOP
MODE
) or DOWN
5