Download Print this page

Troubleshooting; Warranty - Gira 5304 00 Operating Instructions

Wireless diagnostic unit

Advertisement

Wireless diagnostic unit

5.2 Troubleshooting

After the operating mode eNet Send, eNet Status or Noise is switched on, the LED will
flash green for approx. 5 seconds.
Battery is discharged.
Replace the battery with the same type (see Inserting battery).
After the repeater function is switched on or off, the LED will flash green for approx. 5
seconds.
Battery is discharged.
Replace the battery with the same type (see Inserting battery).
5.3 Conformity
Gira Giersiepen GmbH & Co. KG hereby declares that the radio system type
Order No. 5304 00
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.gira.de/konformitaet

5.4 Warranty

The warranty follows about the specialty store in between the legal framework as provided for
by law
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel +49(0)21 95 - 602-0
Fax +49(0)21 95 - 602-191
www.gira.de
info@gira.de
32587112
10865125
29.03.2017
5/5

Advertisement

loading

This manual is also suitable for:

Enet