Important Information - Gazer MMW50 Series User Manual

ENG
•
Do not insert or remove the SD card when the device is on. This
can lead to the built-in DVR malfunction. Wait for 30 seconds
after DVR shut down and only then safely remove the memory
card.
• Use at least 0.5 seconds time interval while pressing control
buttons, this guarantees proper functioning of the device.
• When connecting the device, use only the original power supply
cable.
• Use the restart option by (long pressing RST button) in the fol-
lowing cases:
• power indicator is not on when the power supply cable is con-
nected;
• the device does not switch from the standby to the recording
or control mode;
• the device fails to function properly.
• Files protected from overwriting by G-sensor are recorded in a
loop with a 15 files limit. Closely monitor the free space remaining
on the memory card to avoid loss of protected files due to loop
overwriting that takes place within the limits allocated for such
files on the memory card.
6

Important information

Warning!