Instructions For Use - Lakeland TO GO 61783 Instruction Booklet

INSTRUCTIONS FOR USE

The coffee machine must be filled with coffee and water and your mug must be
in place before you plug in and switch on the machine.
1. Fill the travel mug or your own mug with cold tap water.
2. Lift the lid using the lip at the front of the lid and fill the water tank with the water
from your mug. You may need to hold the lid open.
WARNING: To avoid the risk of burning or scalding from hot coffee or steam do not fill
beyond the 14 oz level inside the tank. Always use a minimum of 260ml of water.
tab
tab
8oz = 260ml
10oz = 300ml
14oz = 430ml
3. Place the empty travel mug or your own mug onto
the tray. If using the travel mug, take off the lid
first. If you are using a shorter mug, take care as
hot coffee can splash out of the mug when brewing
through the appliance.
4. Put the filter basket into the brewer with the tab on
the right. It will sit neatly inside.
5. Take the filter, add 15g of ground coffee. You can
add more or less according to your taste, but always
use a minimum of 6g and a maximum of 20g per
mug. Gently shake the filter to distribute the coffee
evenly.
6. Put the filter into the filter basket with the tab on
the right. It will sit flat neatly inside.
7. Close the lid.
8. Plug in and switch on at the socket. When first
turned on the LCD will illuminate blue and 12:00 will
flash on the screen.
9. Switch on the brewing cycle by pressing the
ON/OFF button. The red 'ON' light will illuminate and
flash to indicate the brewing cycle has started. The
LCD will illuminate blue and 12:00 will flash with a
picture of a mug and 'ON' will display on the panel.
7