Klarstein VitAir Turbo SMART Manual page 21

Turn the WiFi of the VitAir on and off
Note: If you have purchased a Wifi version, you can control the device via Wifi.
Otherwise, you will find more useful information in the app.
1. Turn on WiFi connection:
Simultaneously press the TEMP (+) and TEMP (-) buttons until the unit beeps. The
WiFi icon will flash and the device will automatically search for other WiFi devices
in the area.
Note: Device will back to "--" automatically 5 minutes after finished the works, or no
command input in 5 minutes after switched on the device.
2. Switch off WiFi connection:
To turn off WiFi and restore default factory settings, simultaneously press the TIME
(+) and TIME (-) buttons until the unit beeps. Once the WiFi icon disappears, the
connection is terminated.
For changes to the WLAN or connection problems
If you make changes to your WLAN (e.g., a password change), the device must also
be reconnected. Simultaneously press the TEMP (+) and TEMP (-) buttons until the unit
beeps. The WiFi icon will flash and the device will automatically search for other WiFi
devices in the area.
1 Open the Klarstein app.
2 Open the device control of the VitAir.
3 Follow the instructions from the app.
EN
21