Stihl FS 260 C Instruction Manual page 22

English
4
3
2
b
a
Mount deflector for metal mowing
N
attachments.
Place the cutting attachment (1) in
N
position.
Collar (a) must locate in the cutting
attachment's mounting hole (b).
Fit the thrust washer (2) – convex
N
side must face up.
Fit the rider plate (3).
N
Block the drive shaft.
N
Screw on the nut (4)
N
counterclockwise and tighten it
down firmly.
Remove the tool used to block the shaft.
20
Removing the Cutting Attachment
Block the drive shaft.
N
Unscrew the mounting nut
N
clockwise.
1
If the mounting nut turns too freely, fit a
new one.
Mounting shredder blade 270-2
Note on new machines that come
standard with a mowing head only: In
addition to the "shredder blade mounting
kit", a "shredder blade retrofit kit" is
required to mount a shredder blade. Kits
are available from your servicing dealer.
Use guard ring for mowing
N
attachments.
4
3
2
b
a
Mount deflector for shredder blade.
N
Place the shredder blade (1) in
N
position – the cutting edges must
point clockwise.
Collar (a) must locate in the cutting
attachment's mounting hole (b).
The cutting edges of the shredder blade
(1) must point upwards.
Fit the thrust washer (2) – convex
N
side must face up.
Fit the shredder blade guard ring (3)
N
– opening must face up.
Block the drive shaft.
N
Screw on the nut (4)
N
counterclockwise and tighten it
down firmly.
Remove the tool used to block the shaft.
FS 260 C, FS 360 C
1