Technical Data; Battery And Charger; Replacement Parts; Intended Use - AEG Powertools ACS18BS6 Original Instructions Manual

TECHNICAL DATA

Rated voltage
Max bar length
Chain oil tank capacity
Weight (without battery pack, with guide bar, chain and empty tank)
Usable cutting length
No-load speed

BATTERY AND CHARGER

Model
Battery pack
Charger
Compatible battery packs
Compatible charger

REPLACEMENT PARTS

Bar
Chain

INTENDED USE

The product is only intended for use outdoors. For safety reasons,
the product must be adequately controlled by using two-handed
operation at all times.
The product is designed for cutting branches, trunks, logs, and
beams of a diameter determined by the cutting length of the guide
bar. It is only designed to cut wood. It is only to be used in domestic
application by adults who have received adequate training on the
hazards and preventative measures/actions to be taken while using
the product.
Do not use the product for any purpose not listed in the Intended
Use. It is not to be used for professional tree services. The product
is not to be used by children or by persons not wearing adequate
personal protective equipment and clothing.
WARNING! When using the product, the safety rules must
be followed. For your own safety and that of bystanders, you
must read and fully understand these instructions before
operating the product. You should attend a professionally
organized safety course in the use, preventative actions,
first-aid, and maintenance of chainsaws. Please keep these
instructions safe for later use.
WARNING! Chainsaws are potentially dangerous tools.
Accidents involving the use of chainsaws often result in loss
of limbs or death. It is not just the chainsaw that is the hazard.
Falling branches, toppling trees, and rolling logs can all kill.
Diseased or rotting timber poses additional hazards. You
should assess your capability of completing the task safely.
If there is any doubt, leave it to a professional tree surgeon.
GENERAL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
26
CORDLESS CHAINSAW
ACS18BS6
L1860R
BL1218
L1815R, L1820R, L1825R,
L1830R, L1840R, L1850R,
L1860R
BL1218, AL1218G, BLK1218,
BL18DP
124MLEA041 (Oregon)
90PX045XTT (Oregon)
26
ACS18BS6
18 V
300 mm (12")
210 ml
3.3 kg
250 mm
10 m/s
ACS18B
-
-
L1815R, L1820R, L1825R,
L1830R, L1840R, L1850R,
L1860R
BL1218, AL1218G, BLK1218,
BL18DP
Save all warnings and instructions for future reference.
The term "power tool'' in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such
as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of
an RCD reduces the risk of electric shock.
ACS18B
18 V
300 mm (12")
210 ml
3.3 kg
250 mm
10 m/s
PER
Sta
whe
you
med
may
Use
pro
safe
con
Pre
pos
pac
you
swit
Rem
too
pow
Do
tim
situ
Dre
you
clot
If d
and
pro
haz
POW
Do
app
at th
Do
off.
dan
Dis
pac
cha
safe
acc
Sto
not
inst
dan
Mai
mo
may
pow
poo
Kee
tool
to c
Use
acc
wor
pow
in a
BAT
Rec
A ch
risk
Use