Playback Monitoring - Tascam GigaStudio, GigaEditor 4 User Manual

Playback Monitoring

This is a good place to briefly point out the various Playback Monitoring features of the GigaStudio Editor.
As you play the keyboard, a variety of real-time things happen on the screen at once, especially if you have
the "Jump to Regions" and "MIDI Select" enabled.
First we will enable the "Jump to Regions" mode:
2. To see how this works, alternately select each of the velocity splits by clicking on it. Notice that when
you select one, its sample lights up in the Sample Window. It highlights in yellow with an orange
border.
44
7. Play E2 on your MIDI keyboard to hear the results. Play soft
and loud and notice how the sample changes depending on how
hard you play.
When you cross the halfway point, it switches from the soft to
the loud sample. This is indicated visually as well in the Velocity
Window. The blue pointer on the left tracks the incoming MIDI
velocity level as you play and rests at the last played velocity
level.
8. You can set the velocity split point by dragging up and down
with the mouse.
Th e exact value of the split point is displayed next to the cursor
as you adjust it. This number represents the highest velocity that
will map to the split below the line.
1. Right-click in the Sample Window and enable Jump to
selected region at the bottom of the menu (clicking the menu
option turns the feature on or off). This feature will highlight
any samples which have regions selected.
TASCAM GigaEditor 4 Manual