Table of Contents
Advertisement
3.
The Dimension Controller dialog for the Velocity dimension appears. In the previous chapter, we
used this dialog to create velocity splits. You can also use it to name, clone, or delete existing splits,
and to change the order of splits within a dimension (even after samples have been mapped to them).
.
5.
Click the Rename button and change the name of each split. Name the first one "Soft" and the
second one "Loud" for now. Th en click OK to close the Dimension Controller dialog.
6.
Now the Velocity Map is divided horizontally to represent these two velocity splits.
TASCAM GigaEditor 4 Manual
2. Click on the header at the top of the Velocity window.
4. Click on the Add button to add a second velocity split. The new split will
appear at the top.
41
Advertisement
Table of Contents
