kim lighting 4300 Series Installation Instructions

16555 East Gale Avenue
City of Industry, CA 91745-1788
626/968-5666 • FAX 626/968-5716
4348 - 49"
4300 Sign/Wall Lighter 4324, 4336 & 4348 Installation Instructions
WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical Code.
!
Portable spear mounts must be plugged into a receptacle protected by a Ground Fault Circuit Interrupter
(GFCI) in accordance with the National Electrical Code. Failure to take these steps may result in serious
personal injury. DO NOT operate luminaire with missing or damaged lens.
SAFETY WARNING: To maintain light efficiency and prevent fixture overheating, lenses must be kept
!
clean and free of dirt, dust, leaves, trash and mineral deposits from water. For optimum performance a
regularly scheduled maintenance program should be followed.
MAINTENANCE: To maintain light efficiency and prevent fixture overheating, lenses must be kept clean
and free of dirt, dust, leaves, trash and mineral deposits from water. For optimum performance a regularly
scheduled maintenance program should be followed.
NOTE: Fixture is approved for upward aiming only. Do not exceed listed backtilt. Fixture may be aimed
downward if protected from rain and sprinklers.
This KIM fixture is supplied with K" NPT male mounting. KEEP THIS SHEET FOR FUTURE REFERENCE.
Tools Required: q Phillips Head Screwdriver
Installation Instructions:
1. Coat swivel threads with thread
sealant to keep moisture from
entering j-box.
4. Tighten set screw under j-box cover.
Revised 7/29/15 ECN 150729013
q B" Allen Wrench
Make certain electrical supply is OFF before starting fixture installation.
!
2. Tighten coupling onto mounting
device.
Set Screw
Gasket
Rev 16
4336 - 37"
q Thread Sealant
3. Attach fixture onto coupling.
Fixture
Wires
5. Attach fixture leads to circuit leads observing polar-
ity, i.e., green ground lead-to-circuit ground, white-
to-common, and black-to-voltage.
4324 - 25"
q Adjustable Wrench
Part No. 95422