Searching; Repeat Playback; Using Power On Play; Play Selected Tracks In Desired Order (Program Playback) - Tascam MD-02 Owner's Manual

Examples:
Track 9: Press 9
Track 12: Press followed by
1
Track 103: Press 1 followed by
After selecting a track by number keys, press the
PLAY key on the remote control to start playing the
selected track. You can also press the
the remote control to start playback standby at the
beginning of the selected track.

Searching

During playback (or in playback standby), you can search
in a track for a part that you want to hear.
Press and hold the search (
main unit or the SEARCH Ô/
remote control.

Repeat playback

Press the key on the main unit or the remote
REPEAT
control to set the repeat mode.
Repeat OFF: REPEAT not shown
Repeat ALL: REPEAT appears
Repeat 1: REPEAT appears and SINGLE appears
Press the REPEAT key during playback or playback
standby to cycle through the modes in this order:
OFF, Repeat ALL and Repeat 1.
OFF Repeat ALL
Press the REPEAT key when stopped to switch
between OFF and Repeat ALL modes.
OFF
By using this function at the same time as the program
or random functions, program repeat and random
repeat are also possible.
NOTE
If the unit is in single repeat mode when the STOP
•
key is pressed, the mode changes to all repeat.
If the unit is in single repeat mode when the power is
•
turned OFF, the mode changes to all repeat when the
power is turned ON again.

Using power on play

By using a commercially available timer, for example, to
turn this deck's power on, it can be made to begin playback
at desired times.
2
0 and then 3
key on
READY
) keys on the
Ô/
keys on the
Repeat 1
Repeat ALL
5 − Playback
1. Connect the deck in advance so that it receives power
from an external timer's power output.
2. Insert an MD for playback.
3. Set the POWER ON PLAY
front panel to . This causes the timer icon to light
ON
on the display.
NOTE
If the POWER ON PLAY switch is set to PLAY but no MD is
loaded, the icon on the display blinks.
4. Set the timer to the desired time.
At the desired time this unit's power is turned ON and
playback starts automatically.
NOTE
Since the contents of the program are not retained when
the power is turned OFF, if the playback mode was set to
"Program," the playback mode automatically changes
to "Continue" when the power is turned ON again and
playback starts.
Play selected tracks in desired order
(program playback)
You can create and play a program of selected tracks in a
desired order.
Up to 32 tracks can be included in the program.
1. When stopped, press the
main unit or the P.MODE
remote control until " Program " appears on the
display.
The number of tracks in the program and the program
total time appear in the character display area.
2. Use the MULTI JOG dial on the main unit or the
number keys on the remote control to select the track
number that you want to add to the program, and
then press the
MULTI JOG
the ENTER key on the remote control to add it to the
program.
3. Repeat step 2 to program additional tracks.
As tracks are added to the program, the number of
tracks in the program and the program total time shown
increase.
4. After finishing setting the program, press the
key to start playing tracks in the program order.
TASCAM MD-02/MD-02B
switch on the main unit's
key on the
PLAY MODE
(play mode) key on the
dial on the main unit or
PLAY
19