Table of Contents
Advertisement
Cleaning and maintenance
Cleaning the exterior of the air purifier
CAUTION
· Please make sure the air purifier is stopped, and pull out the plug from
the power socket in the wall while cleaning.
f Dip a towel in warm water and wring it out before using it to clean the
f
product.
f Use a cotton swab or exclusive cleaning (superfine fiber) cloth to clean the
f
groove.
f If it's too hard to clean the dust on the cover front, remove the cover and
f
wash it with water.
CAUTION
· Do not clean the air purifier with an alkali detergent.
· Do not clean the surface of the air purifier with sulfuric acid, hydrochloric
acid or organic solvent (thinner, kerosene, acetone, etc.), or attach a sticker to
the unit. This may damage the surface of the air purifier.
Cleaning the sensors
PM2.5 / gas sensor
Filter sensor
20
· If there's dust or foreign substances on the
sensor, use a vacuum cleaner to clean the sensor
and its surrounding.
· If there's any foreign substances on the sensor, it
may not perform properly.
CAUTION
· Do not put any dust in the sensor parts.
· For first-use and change of the 2-in-1 filter, wipe
the filter sensor clean with a swab or wiping cloth.
(Please refer to Page 10 for the filter sensor
position.)
Hide quick links:
Advertisement
Table of Contents
