Related Manuals for Vibration Research VR9500
Summary of Contents for Vibration Research VR9500
- Page 1 9500 Hardware Description Manual January 2019 Vibration Research 1294 Chicago Dr. Jenison, MI 49428 USA PH +1 (616) 669-3028 FAX +1 (616) 669-5337 www.vibrationresearch.com...
- Page 2 Hardware Warranty Vibration Research Corporation warrants the controller hardware to be free of defects in materials and workmanship for a period of three (3) years from your original date of purchase. This warranty shall be extended as long as you agree to remain under an Upgrades and Support Agreement subscription with Vibration Research Corporation;...
- Page 3 9500 Hardware Description 2019 Thank you for choosing Vibration Research for your vibration control needs. For recent tips regarding our products, please visit the "support" section or our website at www.vibrationresearch.com/faq.html.
- Page 4 Document last revised Friday, January 25, 2019 - Jenison, Michigan. Vibration Research Corporation may have patents including but not limited to U.S. Patent No. 7,426,426, Japan Patent No. 4429358, Canada Patent No. 2,568,178, China Patent No. 058001235.2, E.U. Patent No. 1766358, and other patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document.
-
Page 5: Table Of Contents
1.3 Physical Dim ensions ................................5 1.4 RJ45 Connections ................................5 1.5 Maintenance ................................6 1.6 Cables, Port Connections, and Pinout Inform ation ................................7 © 2019 Vibration Research Corporation is a registered trademark in the United States and other countries. -
Page 7: Vr9500 Hardware Description
Ensure that the airflow around the front, sides, and back of the device is not restricted. Site Requirements The VR9500 can be mounted in a standard equipment rack or placed on a tabletop, or mounted on the wall. Before installing the device, verify that the site selected for the device meets the following site requirements: ·... - Page 8 This is most easily accomplished by connecting the power cable to the outlet provided in the amplifier for a controller. The power source can be 90-250VAC and 50 or 60 Hertz. No operator settings are required for voltage configuration. © 2019 Vibration Research Corporation is a registered trademark in the United States and other countries.
-
Page 9: Db37 Connector
CAUTION Terminals provided on the unit shall be connected only to passive load transducers or source transducers that apply no more than 10V to the circuit that originates from the VR9500 (or other value that equates to not more than 33Vac RMS /46.7V peak or 70Vdc total on the circuit) CAUTION Other than the IEC inlet for input power to the unit, terminals provided on the rear of the unit shall be connected only to SELV / double insulated circuits of other equipment. - Page 10 LGND Logic Ground ODIS1 TTL Output #1 ODIS3 TTL Output #3 ODIS5 TTL Output #5 ODIS7 TTL Output #7 LGND Logic Ground No Connect © 2019 Vibration Research Corporation is a registered trademark in the United States and other countries.
-
Page 11: Physical Dimensions
The 10/100BASE-T ports are copper Twisted-Pair ports. RJ45 Pin Number Allocation for Ethernet Port Pin No Function TxRx 1+ TxRx 1- TxRx 2+ TxRx 2- TxRx 3+ TxRx 3- © 2019 Vibration Research Corporation is a registered trademark in the United States and other countries. -
Page 12: Maintenance
Replace fuse with same type and rating as fitted. The VR9500 is protected by a fuse in between the power cord and the power switch. The power cord must be removed to replace the fuse. Replace the main fuse with the same type (usually a LittleFuse 0218002.HXP) to... -
Page 13: Cables, Port Connections, And Pinout Information
The VR9500 is powered by using the AC internal power supply. Internal Power Supply Connector The VR9500 supports a single internal power supply to provide power for switching operations. The internal power supply supports input voltages between 90 and 250 VAC. The AC power connector is located on the back panel of the controller.
Need help?
Do you have a question about the VR9500 and is the answer not in the manual?
Questions and answers