Faqs; Troubleshooting - homelabs HME040049N Manual

Using Your Alarm Clock
2. Hold the Radio button for 3 seconds
to scan available FM channels.
These will be automatically saved.
3. Press Radio button once to play
radio.
4. Press (+) and (-) briefly to select FM
frequency manually.
5. Press (+) and (-) and hold for 3 seconds
to select FM station one by one.

FAQs

Where should I place my alarm clock?
Place the alarm 16 to 20 inches from
your head, such as on a bedside table.
How long does the snooze button last?
The Snooze button momentarily stops
the alarm for 5/10/15/20 minutes by
your Snooze setting. Alarm ring will
resume after this time.
Why does the clock need a battery?
The battery serves as a backup power
source if a power failure were to
occur. To ensure that the battery is
functioning, please change regularly.

Troubleshooting

PROBLEM
Buttons are not
responding when
I press them.
Time display
is blinking.
POSSIBLE CAUSES
Pressing more than one
button at a time, or failing
to wait at least one
second between presses.
The (:) symbol on your
LED display should blink
continually. This is normal
and ensures your clock
is functioning. If the
numbers are blinking, you
can adjust the time using
(+) or (-).
Can I use a colored light during sunrise
or sleep timer?
Colored light can be used in sunrise
alarm, but not during sleep timer. To
use the colored light options, press the
light button twice and use (+) and (-) to
select your color.
No sound for alarm clock even though
the radio works fine?
In standby mode, increase the alarm
clock volume with the raise volume
button (You must not be in "Tone",
"Light", "Radio", or any other mode.)
Unplug your alarm clock for
at least 3 seconds before
reconnecting to power.
Touch the Current Time
button to return to the
current time.
You can also turn off the
LED display completely by
pressing the digital display
brightness button.
8
SOLUTIONS