Glossary - homelabs HME040049N Manual

Glossary

Radio - Press this button to play
the radio. Hold for 3 seconds to
scan available FM channels.
Alarm Tone - Press this button to
choose an alarm tone, using (+)
and (-) to adjust. Press again to
confirm.
Lower Volume - Press to decrease
volume.
Snooze - Press to momentarily
stop alarm sound. The default
snooze time is 5 minutes. Press
to change it to 10/15/20 minutes.
After that time, the alarm tone will
resume playing.
Raise Volume - Press to increase
volume.
Display Brightness - Press this
button to choose between three
different LED display intensities:
low, high, and off. Note: The
clock will automatically display
the brightest intensity during
programming but will resume
to the chosen option after 5
seconds.
LED Light - Press once to turn on
the light, then press and hold (+)
and (-) to adjust among 10 levels
of brightness. Press a second time
to switch on light colors, using (+)
and (-) to choose between 8 colors
(from C1 to C8): warm white,
cycling color, red, green, orange,
pink, blue, and light green. Press and
hold to switch off.
Digital Display - This screen
displays the time and modes you
have selected.
AM Icon - This indicates AM time
when displayed.
PM Icon - This indicates PM time
when displayed.
Alarm Icon - This indicates you
have programmed an alarm when
displayed.
Sleep Timer Icon - This indicates
you have set a sleep timer when
displayed.
Select down - Touch down to
maneuver among sound, light, or
radio options.
Select up - Touch down to maneuver
among sound, light, or radio options.
Alarm Option - Touch to turn on
alarm mode. The existing alarm
time will display for 2 seconds.
To adjust the alarm time, hold for
3 seconds then use (+) and (-)
to adjust the hour. Tap again to
adjust the minute, and one last
time to confirm.
To dismiss alarm, tap
stop alarm tone completely.
Current Time - This option is used
to set the time. Touch this button
to switch between a 12-hour
and 24-hour clock, or hold for 3
seconds until the hour time begins
to blink. Then use the (+) and (-)
to adjust the hour. Tap again to
confirm the hour. Move to the
minutes and choose in the same
way. Tap one final time to set the
time.
Sleep Timer - Touch this button to
initiate sleep timer. Touch it once
to set at 15 minutes and each
press will add 15 minutes to the
timer. Light will gradually dim until
it turns off over the course of set
time. Press twice for 30 minutes,
three times for 60 minutes, and
four times to turn off. Leave for 5
seconds to confirm.
6
to