Shooting A Movie And Playback; Shooting A Movie - FujiFilm instax SQUARE SQ20 User Manual

EN

Shooting a Movie and Playback

Shooting a Movie

This section describes basic operation for shooting a movie.
~
Slide the power switch to
Ÿ
Hold the camera.
!
Perform the steps to select your image effects.
(Pages 20 to 21)
■ Eff ects only for movie shooting
You can select three types of filters for movie shooting;
"Retro", " Film Frame", and "Sequence". For details see
page 20.
⁄
Use the zoom ring to confirm the desired
composition of the final image.
16
@
(movie).
¤
• When you shoot a movie, hold the camera with both
hands and brace your elbows against your sides.
• Be careful not to touch the lens surface when you
press the shutter button.
• Be careful that your fingers or the strap do not cover
the flash, lens, or film ejection slot.
• When you use a memory card, a movie can be shot for
up to 15 seconds.
• No sound can be recorded on the movie file.
• When you select "Retro", "Film Frame", or "Sequence",
you cannot cancel the applied filter effect or apply
another filter after shooting a movie.
Press the shutter button fully.
The screen below appears and movie shooting
starts.
• You can use the zoom ring while shooting is in
progress.
• You can see the elapsed time by the bar shown
on the left.
• When you select "Retro" , "Film Frame", or
"Sequence", the camera applies the filter effect to
the movie file while shooting is in progress.
Press the shutter button fully again.
Movie shooting finishes.