Using The Adapter - Targus 120 Watt Universal AC/DC Notebook Power Adapter User Manual

120 Watt Universal AC/DC Notebook Power Adapter

Using the Adapter

To use the adapter with your device, after connecting the
appropriate PowerTip, follow the AC wall socket, In-Auto or
In-Air connection instructions.
AC Wall Socket Connection
Use the AC wall socket connection anywhere a 100-120 volt or
200-240 volt AC power source is available.
1 Connect the PowerTip to the adapter output cable and your
notebook computer, if you haven't done so already.
2 Connect the AC wall socket input cable to the adapter.
3 Plug the AC connector into a wall outlet or power strip.
When the adapter has power, its status light glows green.
Your device's battery is now charging.
You can now turn on and use your device.
In-Auto Connection
Use the In-Auto connection in any vehicle with a 12 V DC
cigarette lighter socket, such as a car, truck or boat or an
airplane equipped with this style of in-seat power system.
CAUTION: To prevent power interruption and any detrimental
effects on your device and/or its software, avoid starting your
vehicle's engine while the adapter is connected to the device.
1 Connect the PowerTip to the adapter output cable and your
notebook computer, if you haven't done so already.
2 Remove the vehicle's cigarette lighter from its socket.
5