Load Paper - Epson Stylus NX530 Start Here

Hide thumbs Also See for Stylus NX530:

Enlarged version

Press each cartridge down until it clicks.

Close the cartridge cover. Press down until it clicks. Then

lower the scanner and press OK.

Wait while the ink delivery system primes. Priming takes

about 5 minutes.

Note:

Your printer ships with full cartridges and part of the ink from

the first cartridges is used for priming the printer.

Caution:

Don't turn off the printer while it is priming or you'll

waste ink.

Load paper

Pull out the paper cassette.

Slide the edge guides to the sides of the cassette.

Slide the edge guide to your paper size.

Load paper against the edge guide with the glossy or

printable side facedown.

Note:

Make sure the paper is loaded against the edge guide

and not sticking out from the end of the cassette.

Slide the edge guides against the edges of the paper,

but not too tightly.

Keep the cassette ﬂ at as you insert it.

Note:

The paper may slide forward slightly as you insert the

cassette. This is normal.

Extend the output tray and ﬂ ip up the paper stopper.

Note:

Do not flip up the stopper if you're using legal-size paper.