Scope Of Delivery; Intended Use - Dometic Waeco MagicSpeed CBI 100 Installation And Operating Manual

_IA_Can Interface.book Seite 9 Dienstag, 26. Januar 2010 8:16 20
MagicSpeed CBI 100
Observe the applicable legal regulations.
a
Install the system in the vehicle interior.
Secure the system in such a way that it cannot become loose
under any circumstances (sudden braking, accidents) and
cause injuries to the occupants of the vehicle.
Do not fit the system where an airbag may open. This could
cause injury if the airbag deploys.
Maintain a sufficient interval to intense sources of heat.
Do not expose the control electronics to moisture.
Connecting the device to other operating voltages than those
specified may cause hazardous situations.
AFter a data protocol update by the vehicle manufacturer, the
device may no longer function according to the instructions.
2

Scope of delivery

See fig. 2
No. Quantity
1 1
2 1
3

Intended use

MagicSpeed CBI 100 (item no. 9101400020) is an interface for converting
digital CAN bus signals into analogue signals. CBI 100 decodes the digital
signals from the on-board vehicle electronics and transmits analogue signals
to the outputs.
MagicSpeed CBI 100 is designed for installation in passenger vehicles with
a CAN bus port.
Designation
CAN bus interface
Connection cable
Scope of delivery
Item no.
9101400020
9