Programming Magicsafe - Waeco MagicSafe MS620 Installation And Operating Manual

MS-620.book Seite 75 Dienstag, 18. Oktober 2005 3:04 15
MagicSafe MS620
10

Programming MagicSafe

Caution!
Do not enable the acoustic function confirmation (alarm siren acknowledge-
ment tone).If you enable the acoustic function confirmation, the alarm system
will no longer conform to regulation 95/56/EC, and continued operation is there-
fore prohibited.
10.1 Software functions
MagicSafe has various software functions which you can alter in accordance with the fol-
lowing table.
No. Software function
1 Self-activation
2 Locking/unlocking with ignition
3 Convenience function
4 Signal duration of the door locking func-
tion
5 Reactivation
6 Locking on reactivation
7 Alarm duration
8 Interior lighting delay
9 Programmable additional input
10 Alarm siren acknowledgement tone
11 Altering the PIN code
12 Deleting the programmed remote control
The most recently used remote control
remains operational.
13 Reset to ex-plant function
Programming MagicSafe
Plant setting Value 1
Off On
Off On
1
(see table in "Using conven-
ience functions" chapter on
0.5 s 0.5 s
On On
On On
30 s 30 s
Off On
Engine bonnet Engine bonnet Early warning
Off On
1
– Press both simultaneously
– Press both simultaneously
Value 2
Off
Off
1–5
page 76)
4 s
Off
Off
60 s
Off
Off
1–9
75