Function - HomeMatic HM-WDS30-T-O Installation And Operating Manual

3

Function

Radio-controlled sensors transfer the measurement
data to the HomeMatic components that they are
taught for. These can be display units, actuators or
the HomeMatic Center.
The sensor transfers its data cyclically in intervals of
between 120 and 180 seconds.
The radio-controlled temperature sensor WDS30-T-O
has an offset temperature sensor with a 3 m long
feed line, which enables the measurement e.g. the
ground temperature, the water temperature in a
garden pond, etc.
Do not use the temperature sensor in oxidi-
zing liquids! The sensor cannot be used for
organic solvents or for acids and bases! The sensor
is only suitable for measurements within a tempera-
ture range of from -19.9°C to +79,9°C.
18