Useful Features Of The Tbf-611; Selecting The Weight Mode (Lb, Kg Or St-Lb) - Tanita TBF-611 Instruction Manual

Useful features of the TBF-611

The TBF-611 allows you to measure both weight and body fat percentage simultaneously
as easily and simply as stepping on a scale.
The TBF-611 can be set for an adult male or female, increasing the accuracy of
the measurements.
Personal data (gender and height) are stored in the memory of the unit.

Selecting the Weight Mode (lb, kg or st-lb)

The TBF-611 can measure weight in three different modes: lb (pounds), kg (kilograms) or
st-lb (British stone-pounds). The default setting (the setting at which Tanita products are
shipped) is lb. If you would like to change that setting, or if at any point another setting
has been inadvertently entered, follow these steps:
Press
cycle through each weight mode until just the mode that you require is displayed. Then
press
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be
automatically set to feet and inches. Similarly, if kilograms is selected, height will be automatically
set to centimeters.
Automatic shut-down function
The automatic shut-down function shuts off the power automatically in the
following cases:
• If you interrupt the measurement process.
The power will shut down automatically within 10 to 20 seconds, depending
upon the type of operation.
• If an extraordinary weight is applied to the platform.
• If you make a mistake during measurement or a key operation.
Note If the power shuts off automatically, repeat the steps from the beginning
(see p.8 for steps).
and simultaneously. Release the buttons, the display will flash. Press
. The display screen will flash to confirm your selection and store it in memory.
to
5