Avamix 928ISB10 Quick Start Manual

Commercial variable speed immersion blenders

Advertisement

Intertek
Commercial Variable Speed
Immersion Blenders
928ISB10
928ISB /12 /14 /16 /18 /21
928ISBW10
Medium Duty
Heavy Duty
Heavy Duty
10" Shaft
12"/14"/16"/18"/21" Shaft
10" Whisk
08/2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 928ISB10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Avamix 928ISB10

  • Page 1 Intertek Commercial Variable Speed Immersion Blenders 928ISB10 928ISB /12 /14 /16 /18 /21 928ISBW10 Medium Duty Heavy Duty Heavy Duty 10” Shaft 12”/14”/16”/18”/21” Shaft 10” Whisk 08/2019...
  • Page 2 SAFETY 1. READ AND SAVE ALL INSTRUCTIONS. 2. Do not immerse the immersion blender in water or any other liquid. Doing so can result in electrical shock. 3. Always unplug from outlet prior to handling or cleaning. 4. Avoid contact with moving parts while operating the blender. 5.
  • Page 3 MODELS MODEL # VOLTS WATTS SHAFT LENGTH 928ISB10 120V 10” 928ISB12 120V 12” 928ISB14 120V 14” 928ISB16 120V 16” 928ISB18 120V 18” 928ISB21 120V 21” 928ISBW10 120V 10” WHISK 928ISB12COMB 120V 12” SHAFT & 10” WHISK 928ISB14COMB 120V 14” SHAFT & 10” WHISK 928ISB16COMB 120V 16”...
  • Page 4 OPERATION 1. Check the cord and plug for damage before operating. DO NOT USE if any damage is noticed. Plug the immersion blender into the 120V outlet. Be sure you are using the correct outlet. Check the cord and plug again before operating. 2. Place the immersion blender into the pot which contains ingredients to be mixed. DO NOT allow more than ¾ of the shaft to be submerged. Doing so can cause damage to the motor and void the warranty. VARIABLE 3. The immersion blender has 2 switches. The SPEED safety switch is labeled ENABLE and is located on the top of the handle.
  • Page 5 CLEANING Wash, rinse and dry the blending shaft/whisk prior to initial use. Blender blades/shaft/whisk should be cleaned after EVERY use to prevent residue build up around the blade assembly. 1. Remove the stainless steel shaft from the motor head and rinse under running water. 2. Scrub with soap and warm water. Try Noble Chemical Sunbright (147SUNBRIGHT) with warm water for a thorough clean.
  • Page 6 EQUIPMENT LIMITED WARRANTY Avamix warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by Avamix covering your Avamix brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment.

This manual is also suitable for:

928isb14928isb16928isb12928isb21928isb18928isbw10 ... Show all

Table of Contents