Braun FreeGlider 6610 Manual page 14

min min
ma x ma x
14
Keeping your shaver in top shape
power supply before cleaning it in water.
Important: When the foil frame is removed, do not
turn on the shaver. Shaving Conditioner may leak.
no!
Daily cleaning
After each shave, you should hold the shaver – turned on
and with its foil frame attached – upside down under
running hot water.
General cleaning
Occasionally you should, while the shaver is turned off,
remove the foil frame, and, using the brush, clean the
m in m in
m ax m ax
cutter block and the inner area of the shaver head.
Replace foil frame, ensuring both sides click audibly into
place. If not properly attached, Shaving Conditioner
could leak.
Note
m in m in
m ax m ax
When cleaning under running water, water may
condensate inside the shaver's cartridge chamber.
This has no effect on the shaver's operation and will
disappear after a while
Tips for the perfect shave
• How much Shaving Conditioner you want to apply
depends on your type of skin: wet skin might require
more Shaving Conditioner. You may want to try out
different scale positions.
• Hold the shaver at right angles (90°) to the skin.
Stretch your skin and shave against the direction of
beard growth.
• To maintain 100% shaving performance, replace
your foil and cutter block every 18 months or when
worn.
This appliance is suitable for cleaning under an
open water tap.
Warning: Detach the hand-held part from the