Preparing For Use; Cleaning And Disinfection - Philips AVENT SCF334 Manual

Warnings to avoid breast and nipple problems and pain:
-
Do not attempt to remove the pump body from your breast while under vacuum. Switch off
the appliance and break the seal between your breast and the pump funnel with your finger.
Remove the pump from your breast.
-
Never use the breast pump while you are sleepy or drowsy to avoid lack of attention during use.
-
Always switch off the breast pump before you remove the pump body from your breast to
release the vacuum.
-
Never use any accessories or parts from other manufacturers or that Philips Avent does not
specifically recommend. This could lead to improper working of the appliance and could
influence Electromagnetic Compatibility (EMC). If you use such accessories or parts, your
warranty becomes invalid.
-
Do not continue pumping for more than five minutes at a time if you do not succeed in
expressing any milk. Try to express at another time during the day.
-
If the process becomes very uncomfortable or painful, stop using the pump and consult your
breastfeeding advisor.
-
If the pressure generated is uncomfortable or causes pain, switch off the appliance,
break the seal between the breast and the pump body with your finger and remove the pump
from your breast.
-
Never drop or insert any foreign object into any opening.
Caution
Caution to prevent damage to and malfunctioning of the product:
-
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
deformation of these parts.
-
Never put the motor unit or the adapter in water, in a dishwasher or in a sterilizer.
-
Although the breast pump is compliant with applicable EMC directives, it may still be
susceptible to excessive emissions and/or may interfere with other equipment.
A consequence can be that the breast pump switches off or goes into error mode.
To prevent interference, keep other electric equipment away from the breast pump during
expressing (see 'Technical information').
-
There are no user serviceable parts inside the motor unit of the breast pump. No modification
of equipment is allowed. If you do, your warranty becomes invalid.
-
Do not short-cut the supply terminals of the batteries.

Preparing for use

Cleaning and disinfection

The motor unit, the silicone tube, cap and the adapter do not require cleaning and disinfection,
as they do not come into contact with breast milk. Clean and sanitize all other parts of the breast
pump before first use. Also clean these parts after each subsequent use and sanitize them before
each subsequent use.
Caution: Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer,
as this causes permanent damage to these parts.
English
9