Preparing For Use; Cleaning And Sanitizing - Philips AVENT SCF334 Manual

English
10

Preparing for use

Cleaning and sanitizing

The motor unit, the silicone tube, cap and the adapter do not require cleaning and sanitizing, as they
do not come into contact with breast milk. Clean and sanitize all other parts of the breast pump before
first use. Also clean these parts after each subsequent use and sanitize them before each subsequent
use.
Caution: Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer, as this
causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (first) use and after each subsequent use. Please check the list in the
General Description section to see which items are included with your breast pump.
Breast pump parts:
- Silicone diaphragm
- Pump body
- Massage cushion
- White valve
- Cover
- Power cushion
Bottle parts:
- Philips Avent Natural bottle
- Dome cap
- Screw ring
- Teat
- Sealing disc
Accessories
- Philips Avent storage cup
- Philips Avent storage cup adapter
Supplies needed for cleaning:
Washing in sink
- Mild dishwashing liquid
- High quality drinking water
- Soft brush or clean dish towel
- Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the breast
pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at the
ribbed tab on the side of the valve.
Washing in dishwasher
- Mild dishwashing liquid/tablet
- High quality drinking water