Philips AVENT SCF334 Manual page 12

English
10
Cleanable parts
Clean the following parts before (first) use and after each subsequent use. Please check the list in
the General Description section to see which items are included with your breast pump.
Breast pump parts:
-
Silicone diaphragm
-
Pump body
-
Massage cushion
-
White valve
-
Cover
-
Power cushion
Bottle parts:
-
Philips Avent Natural bottle
-
Dome cap
-
Screw ring
-
Teat
-
Sealing disc
Accessories
-
Philips Avent storage cup
-
Philips Avent storage cup adapter
Supplies needed for cleaning:
Washing in sink
-
Mild dishwashing liquid
-
High quality drinking water
-
Soft brush or clean dish towel
-
Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the
breast pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets
damaged, your breast pump does not function properly. To remove the white valve, gently
pull at the ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Detach all parts and soak for 5 minutes in hot water with some mild
dishwashing liquid. Clean all parts with a soft brush or clean dish towel and then rinse them
thoroughly (Fig. 2).
Washing in dishwasher: Clean the parts, except the motor unit, the silicone tube and cap and
the adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your fingers in warm water with some washing-
up liquid. Do not insert objects into the valve, as this may cause damage.
Washing in dishwasher
-
Mild dishwashing liquid/tablet
-
High quality drinking water