Rear Panel Connections, Switches And Selection - McIntosh MI254 Owner's Manual

BALanced Input
CHANNEL 4/Left
UNBALanced Input
CHANNEL 4/Left
BUS 1 Left and Right INput and
OUTput Connections Jacks
1
BUS 2 Left and Right INput and
OUTput Connections Jacks
1
PWR CNTRL (Power Control)
IN receives turn On/Off signal
from a McIntosh component.
PWR CNTRL (Power Control)
OUT sends a turn On/Off signal
to another McIntosh Component
CHANNEL 4/Left Output
Connections for a 4 ohm
or 8 ohm Loudspeaker
Refer to page 7 for detailed information about utilization of the CHANNEL 1-4 Input Switches and the functioning of the BUS 1-2 INput and OUTput connection jacks
1
6
BALanced Input
CHANNEL 3/Right
UNBALanced Input
CHANNEL 3/Right
CHANNEL 4/Left
Input Selector Switch
CHANNEL 3/Right Output
Connections for a 4 ohm or
8 ohm Loudspeaker
BALanced Input BALanced Input CHAN-
CHANNEL 2/Left NEL 1/Right
UNBALanced Input
CHANNEL 2/Left
CHANNEL 3/Right
Input Selector Switch
1
CHANNEL 2/Left Output
Connections for a 4 ohm or
8 ohm Loudspeaker
Rear Panel Connections and Switches
UNBALanced Input
CHANNEL 1/Right
CHANNEL 2/Left
Input Selector Switch
1 1
CHANNEL 1/Right Output
Connections for a 4 ohm or
8 ohm Loudspeaker
Main Fuse, refer to the
Rear Panel for the correct
fuse size and rating
Connect the MI254
Power Cord to a live
AC Outlet
CHANNEL 1/Right
Input Selector Switch
1