Table of Contents
Advertisement
28
Operating
To display the DVD Menu
r
When you play a DVD which contains several
menus, you can select the menu you want by using
the DISC MENU.
1. Press DISC MENU. The disc's menu appears.
2. Select the menu by using W/S/A/D.
3. Press bENTER to confirm.
To display the DVD title
r
When you play a DVD which contains several titles,
you can select the title you want by using the
TITLE.
1. Press TITLE.The disc's title appears.
2. Select the menu by pressing W/S/A/D.
3. Press bENTER to confirm.
4
Changing subtitle code page
y
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2. Use W/S to select the [Code Page] option.
3. Use A/D to select desired code option.
4. Press x BACK to exit the On-Screen display.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures
and to listen to the sound quicker than to play at a
normal speed.
1. During playback, press d PLAY, MONO/
STEREO to play at 1.5 times speed. "dX1.5" will
appear on the screen.
2. Press d PLAY, MONO/STEREO again to exit.
Resume playback
ryut
The unit records the point where you pressed the
Z STOP depending on the disc.
If "MZ (Resume Stop)" appears on the screen briefly,
press d PLAY, MONO/STEREO to resume playback
(from the scene point).
If you press Z STOP twice or unload the disc,
"Z"(Complete Stop) appears on the screen. The
unit will clear the stopped point.
,
Note
The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B OPEN/CLOSE, etc).
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Screen Saver
The screen saver appears when you leave the unit
in Stop mode for about five minutes.
Advertisement
Table of Contents
