TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual page 68

Zones TraversalZone [1..50] Bandwidth PerCall: <String>
Shows the bandwidth in kbps allowed per call in the traversal zone.
Zones TraversalZone [1..50] Bandwidth Used: <String>
Shows the bandwidth in kbps being used in the traversal zone.
Zones Zone [1..50] [status = <Warning/Active/Failed>]
Shows the status of the connection to the zone.
Zones Zone [1..50] Cause: <String>
Shows an error reason for a failure to communicate with the zone. Only present if the zone
status is Failed or Warning.
Zones Zone [1..50] Name: <String>
Shows the name of the zone.
Zones Zone [1..50] Gatekeeper [1..6] [status = <Unknown/Active/Failed>]
Shows the status of the connection to the gatekeeper.
Zones Zone [1..50] Gatekeeper [1..6] Cause: <String>
Shows an error reason for a failure to communicate with the gatekeeper. Only present if the
gatekeeper status is Failed.
Zones Zone [1..50] Gatekeeper [1..6] Address: <String>
Shows the address for a gatekeeper in the zone.
Zones Zone [1..50] Gatekeeper [1..6] Port: <String>
Shows the port for a gatekeeper in the zone.
Zones Zone [1..50] Calls Call [1..900]: <Integer>
Shows the index of a call in the zone.
Zones Zone [1..50] Bandwidth Total: <String>
Shows the total bandwidth in kbps allowed in the zone.
Zones Zone [1..50] Bandwidth PerCall: <String>
Shows the bandwidth in kbps allowed per call in the zone.
Zones Zone [1..50] Bandwidth Used: <String>
Shows the bandwidth in kbps being used in the zone.
D14172.01
TANDBERG Gatekeeper/Border Controller API User Guide
page 68 of 84